There are many applications for your Versa-Link
ATX-300 One unique advantage that Versa-Link
gives you is the ability to change its operation as
your business grows and your telephone needs
change.
A few of the popular applications are described
in this section.
This application allows your ATX-300 to auto-matically
direct all Auto-dialing FAX calls to your
FAX machine. All manually dialed FAX calls and all
voice calls will be directed to your telephone. You
can easily re-direct manually dialed FAX calls to
your FAX by pressing * 2 (or another code, if
re-programmed) on your telephone. If desired,
another data device such as a computer MODEM
can be added.
As your business grows, you may want to make your
FAX line a dedicated line. Your ATX-300 can still give
you maximum utility of your phone lines. You may
want to re-configure your system to the application
described below to allow outgoing voice calls on this
FAX line.
In this application, your ATX-300 will direct all
incoming calls to your FAX machine when attached
to the DEVICE 1 connector on your ATX-300. When
your FAX is not in use, you will be able to use this
line for telephone calls.
This application allows you to use up to three data
devices, such as FAX, MODEM, Credit Authorization
Terminal, etc. Normally, incoming FAX calls will be
directed to your FAX equipment. Data calls can easily
reach your MODEM or other equipment by dialing the
proper device selection code.
Many configurations exist. For example, you can use
your ATX-300 to:
- Screen incoming calls to your FAX, MODEM or
other data equipment. Alleviates “junk” FAX and
computer hacking.
- Allow two or three offices to share a single line with
privacy.
- Allow two or more answering machines to be used
together for stock quotations, dictation, daily results,
sports scores, new real estate listings, etc.
- Allow remote cash register polling on an existing
telephone line.